Stainless steel corner seat valves are widely used in food and chemical processes, sterilization machines, high-pressure disinfectors, dry cleaning machines, and beer production lines. Many people don't know the characteristics of pneumatic stainless steel corner seat valves. Below, I will introduce them to you.

The characteristics of pneumatic stainless steel corner seat valves are as follows:

1. Easy installation: The pneumatic head can rotate 360 º. One to two limit switches can be easily installed.

2. Pneumatic controller: thickened engineering plastic shell, safe and reliable. Low wear piston structure, large capacity and low gas consumption. Internal components are self lubricating and maintenance free.

3. It has multiple control modes: normally open, normally closed, and double acting.

4. Require smaller pneumatic actuators: When fluid flows from above the valve stem, a smaller control head is optional.

5. Easy connection: MAMUR standard connection, embedded metal connector.

6. Long life guide rod: The valve rod is sealed with wedge shaped Teflon (PTEE) to avoid the introduction of dirt. Self lubricating, maintenance free. The valve stem is specially treated to ensure good fixation and can automatically correct its position.

7. There is no water hammer effect, and when fluid flows under the valve stem, the water hammer (water impact) is absorbed.

8. Valve body structure: The flow rate is 30% larger than that of ordinary corner seats, with smaller volume and better fluid flow pattern. Stainless steel 316 valve body, Teflon seal, high temperature resistance, corrosion resistance. The service life is up to 7 million times.